Introduction and Design of Carcel Lamp
– Invented by French watchmaker Bernard Guillaume Carcel in the nineteenth century
– Designed to overcome disadvantages of Argand-type lamps
– Oil reservoir located under the burner, making the lamp top heavy
– Clockwork mechanism in the lamp base drove a small pump submerged in the oil tank
– Fuel overflowed the top of the wicks to cool the burner
Advantages of Carcel Lamp
– Movement operated unattended
– Oil could be used to the last drop
– Lamp stayed lit for sixteen hours continuously without refilling
– Provided illumination for several persons at the same time with a single burner
– Considered an efficient lighting device for domestic purposes
Disadvantages of Carcel Lamp
– Complex and expensive devices
– Prone to problems in the mechanism
– Most popular in wealthier European cities
– Necessity of returning them to manufacturers for repair
– Eventually superseded by the simpler Moderator lamp in 1829
French Physical Standard Carcel Lamp
– Consisted of a cylindrical Argand burner
– Standard brightness achieved when 42 grams of colza oil were consumed per hour
– Supply and draught regulated by clockwork
– Used as the standard measure for illumination in France
– Played a significant role in the history of lighting technology
Related Resources
– List of obsolete units of measurement
– United States Lighthouse Society’s Lamp Glossary of Terms
– Vincent P. Plescia’s article on successful innovations in domestic oil lighting
– Herbert Hall Turner’s chapter on photometry in the Encyclopædia Britannica
– Additional references and resources for further exploration Source: https://en.wikipedia.org/wiki/Carcel_lamp
The Carcel lamp was an efficient lighting device used in the nineteenth century for domestic purposes and in France as the standard measure for illumination.
The lamp was invented by the French watchmaker Bernard Guillaume Carcel (1750–1818) to overcome the disadvantages of the Argand-type lamps then in use. The vegetable - mostly colza - oils then available were thick and would not travel far up a wick. The Argand lamps used a gravity feed which meant that the oil reservoir was located above the burner, casting a shadow and making the lamp top heavy. Carcel designed a lamp with the oil reservoir under the burner, in the body of the lamp. To keep the oil moving up to the burner, Carcel housed a clockwork mechanism in the lamp base that drove a small pump submerged in the oil tank. The winding key was located at the bottom of the lamp base.
Another innovative feature was that fuel was pumped into the wick tubes at a greater volume than was necessary for burning so that it overflowed the top of the wicks, thus cooling the burner.
The advantages Carcel claimed for his lamp in his 1800 patent in Paris were that the movement operated unattended, the oil could be used to the last drop, the lamp would stay lit for sixteen hours continuously without refilling, and it provided illumination for several persons at the same time with a single burner.
They were complex devices however, and were expensive and prone to problems in the mechanism. They were most popular in wealthier European cities. Their unpopularity was partially due to the necessity of having to return them to the (mostly European) manufacturers for repair. In 1829 the simpler Moderator lamp was invented, which dispensed with clockwork and used only a weighted piston to move the oil, and this eventually superseded them.
The French physical standard Carcel lamp consisted of a cylindrical Argand burner, and gave the standard brightness when 42 grams of colza oil were consumed per hour. The supply and draught were regulated by clockwork.
